PRODUCT DESCRIPTION

Accumax offers water metering solutions based on proven technology of Measurements and represent the next generation of smart metering.

Turbine meters are simple to operate and maintain also in service, it’s proved reliable ,cost-effective method for achieving accurate flow measurement.. Turbine flow meters are designed to maximize throughout and minimize pressure drop, maintain high flow rates over an extended flow range and offer pulse output that is linear to the flow rate. The turbine meters also minimize fiscal measurement uncertainty by delivering high-frequency pulse resolution to account for minute increments of the flow rate.

A turbine flow meter is used for volumetric total flow and/or flow rate measurement since it has a relatively simple working principle. When fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pick off(s) mounted on the flow meter body.

APPLICATION

• Measurement/Control
• Batching Application/ Flow rate Comparator (Inlet V/s Outlet)/ Dosing Application.

APPLICATION AREAS

• Chemical Industries/ Pharmaceutical Industries
• Food & Sugar Industries
• Textile Industries
• Ceramic Industries/ Paper Mills
• Industrial R.O. /Water supply schemes

VARIOUS MODES 

• Indicator & Totalizer : The meter is in flow indication mode with showing totalizer in display in order to monitor current flow.
• Batcher : Relay will energize after a pressing start button and remains energized till fixed quantity of liquid passes through the sensor. The batcher has a halt and reject batch function.
• Flow Comparator : The meter has two sensors for permeate and reject line. The meter displays both the flow rates and calculates percentage recovery also gives alarm on reducing rate of recovery.
• Rate Switch Mode : The relay has  programmed to get energized whenever actual flow falls/rise the set value. Display shows “LOW/HIGHFLOW RATE”. Ideal f or flow interlock, chemical dosing.
• Pulser : To operate specific task on completion of prefix volume. Meter can configure to any metering /dosing pump.

MODELS

• 1”Full Bore Turbine Type.
• Insertion Type available for 1.5”2”,2.5”, 3”,4”,6”,8”,12”line sizes.

FEATURES

• Each fitting individually calibrated and marked with K factor. (ml/pulse)
• Ceramic ball bearing for superior low flow performance.
• High level (5VDC) signal can be sets up to 100ft. without transmitter.
• For best results we recommend to provide a straight run of 10 and 5D on the upstream and downstream respectively.
• Insertion type sensor also available with solvent cementable adaptors for PVC tees at extra cost.
• Fitting automatically since probe sent at correct depth and orientation.