Industrial IoT
IoT Device
The Accumax IoT device is sensor-module hardware that transmits data from one location to another over the Internet; the source describes IoT devices as covering wireless sensors, software, actuators and computer devices.
How it works
Hardware with sensor modules acquires data in the field and transmits it over the Internet via a cellular connection. A SIM card is inserted into the slot on the top side of the electronic card, sensors are wired to the device and 24 V DC power is applied; the device then reports real-time data and raises alert messages over SMS or web.
Features
-
4G/3G/2G network support
Cellular connectivity across 4G, 3G and 2G networks.
-
Wide input voltage range
9-36 V DC input.
-
Alerts over SMS/web
Alert messages delivered by SMS or over the web.
-
Alert notifications to up to 5 mobile numbers
Maximum of five registered mobile numbers.
-
Sensor disconnect alert
Raises an alert if a connected sensor is disconnected.
-
Threshold limit cross alerts
Raises an alert when a threshold limit is crossed.
-
LED indications
On-board LED indication.
-
Real-time data and alert messaging
Source states the device gives real-time data and alert messages.
-
Retrofit to existing systems
Source states it can be used to upgrade any existing system.
-
Field installation via SIM card
SIM card slot on the top side of the electronic card; sensors are then connected and 24 V DC supplied.
Frequently asked questions
What supply voltage does the Accumax IoT device need?
It has a wide input voltage range of 9-36 V DC. The installation procedure specifies giving the system a 24 V DC supply.
Which mobile networks does it work on?
It supports 4G, 3G and 2G networks.
How many people can receive alerts, and how are alerts delivered?
Alert notifications can go to a maximum of 5 mobile numbers, delivered over SMS or web.
Will it tell me if a sensor fails or a limit is exceeded?
Yes. It provides sensor disconnect alerts and threshold limit cross alerts.
How is the device installed and commissioned?
Insert a SIM card into the slot on the top side of the electronic card, ensuring it is seated correctly, then connect the sensors to the IoT device and apply a 24 V DC power supply.
Can it be added to equipment that is already installed?
Yes. The source states it has wide application because it can be used to upgrade any existing system.
Gallery
Need help specifying the right instrument?
Tell us the fluid, line size and accuracy you need. Our engineers will recommend a configuration and quote it.